Technology

What exactly is an electrical connection, and how does one go about making one?

We frequently employ terminology in technical language that are unfamiliar to the general public. As a result, I’ve chosen to present a series of commonly used words in a more conversational and explanatory tone.

When you hear something like “The electrical connection is defined as a work in part of the electrical installation where a connection point is generated between the distribution networks and the end consumer’s supply installation,” you might be confused as to what these two terms mean.

Let’s get going!

The supplying power firm sells electricity to the general public via an electrical network (either through poles or underground). The distribution networks include everything from high-voltage lines to medium- and low-voltage lines.

When we talk about the final consumer supply installation, we’re talking about the building’s installation. In this fashion, the connection or general power line (L.G.A.) is the link between the public space’s electrical network and our interior installation, starting at the C.G.P. and ending at the counter.

The electricity supply company is responsible for the electrical connection. It is part of the connection facilities in the case of a single-family residence.

The link installation consists of a number of mechanisms that, on a broad level, connect the general network to your installation (up to your control panel and C.G.M.P. protection)

  • Box of general defense (CGP)
  • Counters for general power lines (LGA) (CC)
  • Power Control Switch for Individual Referral (DI) (ICP)
  • Devices for general command and protection (DGMP)
  • Low Voltage Electrotechnical Regulation. Normative REBT.
  • Link facilities for ITC-BT-13 and GUIDE-BT-13. Boxes for general protection.
  • Link facilities for ITC-BT-14 and GUIDE-BT-14. Line of authority in general.
  • Individual referrals. ITC-BT-15 and GUIDE-BT-15. Link facilities.
  • Interior or reception installations, ITC-BT-19 and GUIDE-BT-19. Prescriptions that are generic.
  • Interior or reception setups with the ITC-BT-20 and GUIDE-BT-20. Systems for installation.
  • Interior or reception installations, ITC-BT-21 and GUIDE-BT-21. Tubes and passageways for protection.

The tubes’ installation and location are as follows:

  • Electrical installations in buildings, UNE 20460-5-523. Part 5: Electrical material selection and installation. Admissible currents in cable management systems (Chapter 523).
  • GUIDE-BT-19 and ITC-BT-19 Installations for the interior or for receiving. Prescriptions that are generic.
  • Interior or reception setups with the ITC-BT-20 and GUIDE-BT-20. Systems for installation.
  • Interior or reception installations, ITC-BT-21 and GUIDE-BT-21. Tubes and passageways for protection.

Glow Electric Electrician

Their Local Electricians in Belfast services in Northern Ireland are becoming increasingly popular among businesses and people.

Not only in NI but also in the surrounding metropolitan region. Belfast, Derry, Lisburn, Bangor, Londonderry County Borough, and a number of other municipalities are among them. Glow Electric work to resolve various types of electrical problems and projects, including:

  • As authority grows,
  • Lighting projects involving meter centralization changes
  • In stores, there is specific lighting.
  • Garage energy conservation
  • Electrical bulletins for updating electrical installations in residences
  • projects involving electricity

Electrician with a license

Also, keep in mind that they only use licensed electricians. As a result, they can perform a wide range of electrical procedures.

If you need an electrical installation bulletin, Glow Electric handle everything for you, from start to finish, with no tiny print, so you only have to deal with the electrical contractor you’ve chosen.

Electrical installations that are covered by insurance

The importance of hiring an electrician in NI cannot be overstated. They’re dealing with the safety of electrical systems, therefore it can’t be done by just anyone. This guarantee can only be provided by a company that has been approved by the Ministry of Industry and has a history of more than 20 years. You can contact with them for advice on any topic related to our industry.

Electricity consumption meter

Electricity distribution companies are required to replace current meters of power less than or equal to 15 kW with meters that have remote management capacity by the end of 2018, according to Royal Decree 1110/2007, order ITC 3860/2007, and technical instruction IET 290/2012.

These meters are “intelligent,” with remote measurement (which is simply a remote reading of consumption) and remote administration capabilities (carry out remote operations).

Leave a Reply

Back to top button